Omschrijving

Dit product is geopend geweest. Alle bijhorende accessoires worden meegeleverd. DESCRIPTION: ValueRAM's KVR1066D3N7K2/4G is a kit of two 256M x 64-bit 2GB (2048MB) DDR3-1066 CL7 SDRAM (Synchronous DRAM) memory modules, based on sixteen 128M x 8-bit DDR3-1066 FBGA components. Total kit capacity is 4GB (4096MB). The SPDs are programmed to JEDEC standard latency 1066Mhz timing of 7-7-7 at 1.5V. Each 240-pin DIMM uses gold contact fingers and requires +1.5V. The electrical and mechanical specifications are as follows: FEATURES: JEDEC standard 1.5V ± 0.075V Power Supply VDDQ = 1.5V ± 0.075V 533MHz fCK for 1066Mb/sec/pin 8 independent internal bank Programmable CAS Latency: 5,6,7,8,9,10 Posted CAS Programmable Additive Latency: 0, CL - 2, or CL - 1 clock Programmable CAS Write Latency(CWL) = 7(DDR3-1066) 8-bit pre-fetch Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] Bi-directional Differential Data Strobe Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%) On Die Termination using ODT pin Average Refresh Period 7.8us at lower then TCASE 85°C, 3.9us at 85°C < TCASE . 95°C Asynchronous Reset 1066Mbps CL7 doesn’t have backward compatibility with 800Mbps CL5 PCB : Height 1.180” (30.00mm), double sided component

Kenmerken

Sallandnummer	136054 (link )
Merk	Kingston
Type	KVR1066D3N7K2/4G
Fabrikantnummer	KVR1066D3N7K2/4G
EAN	0000000000000
Garantie	1 jaar
Link naar fabrikant	Klik hier
Te vinden in	DDR3 SDRAM

Specificaties

Voorraadinformatie

• Voeg toe aan verlanglijst
• Afdrukken

Vragen

Stel hier uw vraag over dit artikel

Uw gegevens

Uw naam

Uw e-mailadres

Deze gegevens worden enkel gebruikt om antwoord op uw vragen te geven.

Uw vraag of opmerking

[ Ander beeld ]